| 外墙涂料表面清洁保养工艺 |
| 添加时间：2019/4/20 17:14:23 浏览次数： |
| （1）采用“钙化清洁剂”按1:5比例稀释。（仅供参考） (1) Calcification detergent was diluted in 1:5 ratio. (For reference only) （2）做出清洗小样，确定清洁剂的稀释比例。 (2) Make cleaning sample and determine the dilution ratio of detergent. （3）用板刷浸清洁剂溶液在涂料表面上擦刷，除去污垢。 (3) Brush the surface of the paint with a brush-soaked detergent solution to remove dirt. （4）用清水清洗。 (4) Clean with clean water. （5）涂料表面一般较为粗糙，污垢浸入也较深，因此清洗剂清除比较难。从价格上比较，清洁剂的价格与新料的价格相差无几，故某些工程则放弃清洗而改用喷新涂料的方法来做清洁保养工作。 (5) Coatings generally have rough surface and deep dirt immersion, so cleaning agents are difficult to guolvq.89ix.comguolvqil.89ix.comkongzhifay.89ix.comyalvji.89ix.comzhafab.89ix.comremove. Compared with the price of new materials, the price of detergent is almost the same. Therefore, some projects give up cleaning and use spraying new coatings to do cleaning and maintenance work.lvyouji.89ix.com （6）选用合适的清洁剂，不可轻易使用氢氟酸，禁用盐酸。 (6) Choose appropriate detergents, do not use hydrofluoric acid easily, prohibit hydrochloric acid. 注：在做外墙样板清洗的时候，要挑几个难度高的去做，不能因为个人目的，找个近的洗的干干净净，避免以此为标准，最后在高空中却难达到该标准。 Note: When cleaning the exterior wall model, we should choose several difficult ones. We can't find a nearest clean one for personal purposes, so as to avoid taking it as the standard, but it is difficult to reach the standard in the high air. |
| 上一页 建筑物底层外墙玻璃装饰材料表面的清洁保养工艺 |
| 下一页 外墙玻璃面的清洁保养工艺 |
Copyright © 保定保洁服务有限公司 技术支持：遨游网络